Print

放热焊接在中高压电缆中间接头中的应用论文_李惠庸1,柴宜1,康河文2,胡飞3,张俊杰3

(1.国网甘肃省电力公司经济技术研究院 甘肃兰州 730000;

2.国网甘肃省电力公司 甘肃兰州 730000;3.长园电力技术有限公司 广东珠海 519085)

摘要:近年来,放热焊接技术在中高压电缆中间接头导体连接中应用逐渐广泛,优良的机械和电气性能得到行业内的一致认可。本文针对电缆中间接头制作中导体放热焊接的研究,分析了放热焊接工艺过程对电缆中间接头焊接质量的影响,提出了对应的解决方案。

关键词:放热焊接;工艺;模具;电缆导体

Application of Exothermic Welding in Cable Intermediate Joint

LI Huiyong1,CHAI Yi1,KANG Hewen2,HU Fei3,ZHANG Junjie3

(1. Economic and Technological Research Institute,Chinese State Grid Gansu Electric Power Company,Lanzhou 730000,China;2.Chinese State Grid Gansu Electric Power Company,Lanzhou 730000,China,3.CYG Electric Co.,Ltd,Zhuhai 519085,Guangdong Province,China)

ABSTRACT:In recent years,exothermic welding technology in the cable intermediate connector conductor connection gradually wide,excellent mechanical and electrical performance by the industry's unanimous recognition. Study paper exothermic welding cable conductor produced in the intermediate connector,the influence of the exothermic welding process weld quality intermediate cable joint,the corresponding proposed solutions.

KEY WORDS:Exothermic Welding;Process;Mold;Cable conductor

论文作者:李惠庸1,柴宜1,康河文2,胡飞3,张俊杰3

论文发表刊物:《电力设备》2017年第20期

论文发表时间:2017/11/14

本文来源: https://www.lw33.cn/article/7cf33a35f77e743053dd925f.html